Is your toilet tank taking a long time to reach its normal level? It is necessary to make a quick diagnosis to find the causes of this problem. What are the effective solutions if your toilet flushes slow.
The water inlet pipe is scaled up
The permanent circulation of water promotes scaling on the internal wall of the pipe. The formation of this crust results from the crystallization of minerals such as magnesium and calcium. Tartar forms a deposit year after year along the walls, forming a matrix. The presence of these lime deposits reduces the internal diameter of the pipe and / or of the orifice. This results in a gene in the flow of water. This has the consequence of reducing the flow rate in the reservoir. The toilet flushes slow, causing discomfort in its use.
To remedy this, you just need to do a descaling with a suitable product. Leave on for a few hours to ensure its effectiveness. You can get rid of lime scale by rubbing the dirt off with a steel blade. Under this mechanical action, the deposit crumbles on its own without difficulty. After this cleaning, the water filling should return to its normal speed. The best solution is prevention. Prefer regular maintenance to avoid the formation of these deposits which can damage the entire system.
The float valve contains dirt
Without maintenance, the dirt that is swimming in your flush can enter the float valve. It could be small gravel, dead insects or other tiny garbage. The presence of this dirt at the level of the nozzle interferes with the operation of the tank and your flush fills slowly. However, the role of this part is to regulate the quantity of water discharged into the tank. If you have an old sanitary installation, the system works badly because this nozzle is out of order. This affects the proper functioning of your flush.
The easiest solution to this problem is to do a good cleaning. Remove the cover to access the reservoir. Try to visually spot the dirt and remove it manually with your fingers. If the presence of water bothers you, do not hesitate to flush the toilet several times to empty the contents. Take the opportunity to clean it thoroughly! A float that is too high can decrease the opening of your tank valve which will automatically lead to slower filling of the tank. A simple adjustment at the level of the rod is enough to remedy this. Before this intervention, do not forget to close the water supply and empty the tank. To test the mechanism, flush the toilet and observe. If the water flow remains unchanged, you still have to replace the float.
The tank contains rust deposits
This problem is encountered on older toilet facilities. Over time, reddish deposits can be observed throughout the reservoir. This gunk is rust that comes from metal parts in the flushing mechanism. Corrosion results from the chemical reaction of a steel or iron object with water and oxygen. The rust layer that forms is detached from the surface because of its porosity. It causes clogging of the mechanism and a slowing down of the flushing speed.
If your installation is recent enough, you can try to do the cleaning pieces. Remove the cover to access the reservoir. Locate components with rusting metal parts such as screws and bolts. Remove corrosions with citric acid based products. Before replacing them, it is recommended to coat them with anti-corrosion products such as varnish. If you feel that your installation is really old, the drastic solution is to replace these parts, and perhaps the entire water pipe.
Bottom line: if your toilet flushes slowly, it can be a source of discomfort. Using our tips, you can fix the problem yourself using your DIY skills. If necessary, seek the intervention of a professional to avoid damaging your toilet.