We depend on a water heater day in and day out. As they are often installed in the garage or basement, you don’t think too much about them until you have hot water or you discover that there are water leaks. in the ground. Many water heaters last a long time because they have been properly maintained to extend their life. By extending the life of your water heater, you save money because you don’t have to buy a new one.
You want to create a simple three step program each year to keep your tank in top shape. This program only takes approx. 5 minutes and it’s easy to do. You want to do three things:
Change the temperature
Testing the relief valve for temperature and pressure
Rinse the sediment from the bottom of the tank.
Before we move onto the next paragraph you should know about the Arizona Heating and Cooling Doctor owner Reginald Phillips started HVAC in 2006 as a helper installing units in a new home being built around the Tucson area. Before a year of doing so, he was the lead man running his own crew. He worked his way up through the industry to become one of the best service techs in the Tucson area. he opened one of the biggest companies in the Tucson as a there general manager running a company with over 15 techs he taught the trade to them where some of the techs are now business owners themselves. In 2017 he became the owner of Arizona Heating and Cooling with the idea to give homeowners great service at an affordable price. For more information visit theazhvacdoc.com.
Let’s start with step 1: Change the temperature.
On the front of the water heater there is a dial. It could be a button on the gas valve or a thermostat on an electric heater.
Change the setting to approx. 60 degrees. Keeping your water hotter than that wastes energy and can cause your tank to overheat. Your water heater actually adds cold water to hot water if it is too high for safety.
The second step we need to check is the temperature and pressure relief valve. This valve is essential for the proper functioning of your water heater and constitutes a safety element.
Read More:-Eco-friendly products in UAE
To test the valve, lift the arm halfway, release it, and let it back up.
Hear a growl. The valve allows water to be released into the drain pipe.
If you haven’t heard anything, it may mean that the valve is faulty and needs to be replaced.
The third and final step in maintaining your heater is to remove sediment from the tank. This helps prevent corrosion and rust from building up inside the tank. It’s best to do a full rinse, but that means you’ll have to close the storage tank and drain all the water inside. You can do a smaller download that works. You can perform this mini-rinse while the water heater is still running. Here’s what to do:
At the bottom of the tank there is a drain cock. You can connect a hose and run it outside or put a bucket under the valve.
Your tank may have a handle on the drain or one that needs to be turned with a screwdriver.
Turn the lever counterclockwise. Hot water begins to flow from the tank.
After draining a few liters, close the drain by turning it clockwise.
Warning: be prepared for the water coming out of the water heater to be hot. Make sure there are no children near you during this operation and be careful not to burn yourself.
Even with care, a water heater can have problems. The signs that your water heater is having a problem are as follows:
No hot water
Water is leaking from the bottom of the water heater
Make noise inside the tank.
Rust colored water
Cold or cold water in the faucet when hot water is open
If you have experience replacing water heaters, you can either replace your water heater or try to repair the area that may be damaged. Your second option is to call a plumber. Here are the possible problems that your water heater may have:
The heating element can be damaged if you get hot water when you shower.
Check if you have a hot water shortage problem. Is it in the morning or in the evening, when all the members of the family bathe? You may need a larger tank or a schedule change.
If you encounter rust colored water, you may have corrosion and rust inside your tank, or the anode rod will fail.
If you hear a low clicking noise, the boiling water is inside your tank. Sediment collects at the bottom of your tank and you overheat.
If you find that your heater is leaking, it is usually the relief valve that is not working properly or your tank is rusted or corroded.
It is important to keep your water heater in good condition. You will appreciate the benefits of having hot water when you want it.
It may be a good idea to add a “blanket” around your heater. This is a special mat that helps insulate your water heater and brings it to an insulation value of R-16. Check your oven accessories to make sure they are dry and in good condition before installing the carpet. Make sure the valves and thermostats are not exposed so you can perform routine maintenance. By insulating your water heater, you can reduce standby loss by up to 45%. This saves you up to 9% on your hot water heating costs.
With a little care, your water heater will continue to provide hot water whenever you want it. Would it be a good time to check yours?