Currently set to Index
Currently set to Follow
June 18, 2021

Snap Toad

Read Most Interesting Content

How to Perform Netgear AC750 Setup By Using the Manual Method

If you are looking for a device access the internet in every corner of your house, then we highly recommend you to perform Netgear AC750 setup. In this article, we’ll provide you with the step-by-step guidelines to set up a WiFi router using the Manual method. 

Make sure that you implement the steps in the exact order as they are written. Only then you will be able to perform Netgear AC750 setup in a hassle-free manner. 

Note: In case you get stuck at some point, then don’t hesitate to get in touch with our team of experts. Sometimes, verbal assistance is better than written assistance. 

Step-by-Step Guidelines to Perform Netgear AC750 Setup

  1. Configure the Hardware of the Router

In order to set up a Netgear Nighthawk router in your home, the first thing you need to do is, configure its hardware properly. Start by unboxing the AC750 router with utmost care. Then, grab a power cable and connect its one end into the router and another into the wall socket. Make sure that wall socket you’re using is not worn out.

Also, ensure that the power cable you’re using is free of cuts and other damages. Also, do not proceed further until and unless the power LED light becomes solid green. 

  1. Connect to the Router to the Modem

Once the power LED light turns green, connect the Netgear AC750 router to the modem. You can connect both your WiFi devices by either using a wireless source or an Ethernet cable. In case you use a cable, then ensure that it doesn’t have any breakage. In case it does, then do not waste any more time in replacing it with a new one. 

Note: In case you aren’t able to connect the router to the modem, contact your Internet Service Provider. There might be an internet issue from their end. 

  1. Access the Routerlogin.net Page

As soon as you’ve ensured that your Netgear WiFi router is connected to the modem, power on your laptop. Open a web browser like Google Chrome or Mozilla Firefox and type routerlogin.net in its address bar, located at the top left corner. Press the Enter key. 

In case routerlogin.net doesn’t help you in accessing the web user interface of your router, then it is recommended that you make use of the default IP address to log into your Netgear AC750 router. 

Quick Tip: Whichever web browser you decide to use to log into your device, ensure that it is updated. Additionally, clear its cache, cookies, and browsing history. 

  1. Enter the Default Login Credentials

When you access the Nighthawk router login page, then fill in the default username and password. Remember, the default login credentials are case-sensitive. Next, click on the Log In button to process further. 

For those of you who are unsure about the default username and password, you can refer to the Netgear manual for information. Or even better, why not reach out to our highly qualified technicians?  Surely, they’ll clear all the doubts that you have. 

All you have to do is, drop your query in the comments section below. Our experts are will revert back to you in no time.

  1. Follow the On-Screen Instructions

Once you hit Log In, you will be taken to the Netgear Genie smart setup wizard. You’ll find instructions displayed on the dashboard. Thus, follow the on-screen instructions and finish setting up your Netgear AC750 router. 

Conclusion

So, this was all about how to set up a Netgear AC750 setup using the Manual method. We hope that you enjoyed reading this article. Now, you are free to sit anywhere in your house and enjoy a blazing-fast internet connection.