Currently set to Index
Currently set to Follow
June 18, 2021

Snap Toad

Read Most Interesting Content

How to Get a Stronger WiFi Signal with Netgear EX3700 Setup

So, you are done with the Netgear EX3700 setup for amplifying the current wireless range in your house. But what’s that? You are getting poor or sluggish WiFi speed on your connected devices. Although the extender is a great device to get extended wireless coverage in every corner of your home, yet the WiFi speed is degraded.

However, there is no need to panic at all. Perhaps, you have not performed the Netgear EX3700 setup in the right way! Or maybe, your WiFi router is the culprit. No matter what the reason is, the below-highlighted tips will help you get the most out of your Netgear EX3700 WiFi range extender. After following the given tips, you will definitely be able to get a stronger WiFi signal with your Netgear EX3700 extender.

How does Netgear EX3700 Extender Work?

Comprehending the basics of what your Netgear WiFi extender does will go a long way towards helping you troubleshoot technical issues related to it.

A WiFi extender, repeater, or booster is intended to boost the existing wireless range and coverage. It works by receiving the signals incoming from your main router, amplifying them, and then transmitting the amplified signals. Generally, it works like a bridge between your home router and the connected devices.

With the Netgear EX3700 WiFi extender setup, you can efficiently double the coverage area of your home network. In this way, it offers you WiFi even in the garage, backyard, and areas where you have never thought.

Without taking your more time, let’s ring up the curtains from the process to get a stronger WiFi signal with Netgear EX3700 wireless extender. Read on.

  1. Check the Location of Your Extender

The placement of the Netgear WiFi range extender plays a key role in getting a stronger WiFi signal. Therefore, prior doing anything else, check the location of your Netgear EX3700 extender. Here are the key guidelines to follow while placing your Netgear extender:

  • Keep the extender in the central location of your house.
  • Never hide your extender inside a cupboard, under a table, behind curtains, and inside an almirah.
  • Don’t place it in a box.
  • If possible, place the extender in an open area.

Proper placement of the Netgear extender will also help you access mywifiext local web page without any technical issues.

  1. Check All Cable Connections

Incorrect or loose cable connections between your Netgear range extender, PC, and router can result in a weak WiFi signal. Therefore, keep in mind to make all cable connections in the right way. All of them should be finger-tight and precise.

Also, prior to making any cable connection, verify whether all cables are in good condition. None of them should include any sort of damages and cuts.

  1. Connect to the Right Network

Maybe you are connected to a neighboring network or open hotspot due to which you are not getting proper WiFi signal strength. Connect to the extended network of your EX3700 extender only, i.e. Netgear_ext.

  1. Look For Any Hardware Damage

In the event that your WiFi connection is noticeably slow, there might be hardware damage on your extender. Possibilities are that any of its accessories have got damaged while unpacking. So, be careful while unwrapping your Netgear extender. There should not be any hardware damage. If any, replace that damaged part with a new one.

  1. Look For WiFi Roadblocks

According to experts, WiFi is an electromagnetic radiation, just like light. A number of objects can block it. Walls, metal objects, electronic appliances, water resources, and reflexive surfaces are some common barriers. Concrete and thick walls tend to absorb more WiFi signals as compared to thinner walls.

So, these were some of the things using which you can get a stronger WiFi signal with Netgear EX3700 WiFi range extender.